Unite Explore

Knowledge Base for the Unite Explore Devices

Unite Explore - Signal Strength
The Unite Explore by itself has a built-in antenna, so to get the best performance from it, it needs to be placed where the signal is the strongest.  Note y...
Fri, 14 Dec, 2018 at 11:56 AM
Unite Explore - Factory Reset
Do the following on the device's screen: Tap the right arrow, then Settings, then About Tap Factory Reset Tap the blue Factory Reset button ...
Mon, 1 Oct, 2018 at 9:43 PM
Unite Explore - Software Update
On the screen of the Unite Explore, navigate to Settings and tap it Tap on Software Tap to check for a software upgrade If a software upgrade is...
Mon, 1 Oct, 2018 at 9:43 PM
Unite Explore - External Antenna.
The Unite Explore has two TS-9 female jacks, so any antenna solution needs to end with a TS-9 male plug.   Here are a couple of options we suggest to our m...
Mon, 1 Oct, 2018 at 9:44 PM
Unite Explore - Enabling UPnP
On a laptop or smartphone connected to the hotspot, use a browser to log in http://attwifimanager/ Enter the password attadmin Select Settings > Ro...
Wed, 3 Oct, 2018 at 12:34 PM
Unite Explore - Port Forwarding for Gaming Devices
First, make sure the Unite Explore's UPnP mode is enabled.  To do that: On a laptop or smartphone connected to the hotspot, use a browser to log in (...
Wed, 31 Oct, 2018 at 10:54 AM
Unite Explore - Extend WiFi Coverage
If the Unite Explore's WiFi signal is not reaching as far as you need it in your home, you can extend its range by setting its Wi-Fi Range control. That...
Mon, 1 Oct, 2018 at 9:49 PM
Unite Explore - SIM Swap
Power off the device and then, on the back of the device, take off the back cover and remove the battery Remove the old SIM card and insert the new o...
Fri, 5 Oct, 2018 at 11:44 AM
Unite Explore - Change WiFi name and password
By default the network name and password will display on the home screen of your device. To change the network name or password, login to the AT&T Wi-...
Fri, 8 Mar, 2019 at 9:42 AM